Apex Digital Apex EmergeCard Remote Access - Manual (Page 40)

Emerge Card Remote Access User Guide Operation •••• 36
Setting Alternate Function Key Mapping
You can change the current function key configurations or remove Emerge assignments entirely to
match your existing system usage.
To set alternative key mapping and function keys
1 From Configure, select Function Keys. The Function Keys dialog box appears, allowing you to
view the current key functions.
2 Select a function from the Commands list and you will see the current assigned key with a
description of that function.
3 Type in a new F key assignment in the New F key box if you wish to set an alternate F key for
that function.
To remove an Emerge Function Key assignment
1 Select a function key from the Commands list.
2 Select Remove to free up that function key for use by another application.
Note
Certain keystrokes are reserved, for example is reserved for Windows. Do not use if you are connected to an Apex
switch because is used to gain access to OSCAR Advanced Menus screen.