Show port alert command, Show server command – Avocent CPS1610 CPS User Manual
Page 79
Chapter 5: CPS Commands
73
Show Port Command Display Fields for SPC Ports
Field Content
Status
ONLINE indicates the SPC is powered on, OFFLINE Indicates the
SPC is powered off.
Version SPC
fi
rmware
version.
Sockets
Number of sockets on the SPC, either 8 or 16.
Minload
Minimum load amp value (from SPC command).
Maxload
Maximum load amp value (from SPC command).
Wake
Wakeup state for socket (from SPC command).
ON Min
Minimum On time (from SPC command).
OFF Min
Minimum Off time (from SPC command).
Show Port Alert command
The Show Port Alert command displays a port’s alert strings.
Access right: SMON; Access level: A and AA
Syntax
SHOW PORT <port> ALERT
Show Port Alert Command Parameter
Parameter Description
<port>
Port number in the range 1-8 for a CPS810 or 1-16 for a CPS1610.
Show Server command
The Show Server command displays CPS configuration information and statistics.
Access right: SMON; Access level: A and AA
Syntax
SHOW SERVER
Show Server Command Display Fields
Field Content
Server
CPS IP address (from initial confi guration or Server Set command).
Mask
Subnet mask (from initial confi guration or Server Set command).
Gateway
Gateway IP address (from initial confi guration or Server Set command).
Up Time
Days, hours, minutes and seconds since CPS was rebooted.
MAC Ethernet
MAC
address.
S/N
CPS serial number.