Avocent CPS1610 CPS - Manual (Page 29)

Chapter 3: Operations 23
For more information, see Show Server CLI command and Server PPP
command in Chapter 5.
To display PPP confi guration information:
Issue a Show Server PPP command.
SHOW SERVER PPP
For more information, see Show Server PPP command in Chapter 5.
Configuring and using dial-in connections
You can attach an external modem to the CPS serial CLI port for dial-in serial
CLI access to the CPS. This may be used as a backup connection if the CPS is
not accessible from the network. It may also be used as a primary connection
at remote sites that do not have Ethernet network capability. The modem must
be Hayes compatible.
To specify a modem initialization string:
1. Issue a Show Server CLI command to ensure that the port where the
modem is connected has been defi ned as the serial CLI port.
SHOW SERVER CLI
2. Issue a Server CLI command, using the Modeminit parameter to specify
the modem initialization string.
SERVER CLI MODEMINIT=“<string>”
The string must be enclosed in quotes and must include at least the
command settings ATV1 and SO=1, which cause the modem to issue
verbose response strings and auto-answer the phone on the fi rst ring. For
more information, see Server CLI command in Chapter 5.
The modem initialization string is sent to the cabled modem when any of
the following conditions occur:
• CPS initialization
• Detection of a transition of DSR from low to high
• Completion of a call when DCD changes from high to low
3. Upon successful modem connection, press the Enter key until the login
prompt appears.
To display modem confi guration information:
Issue a Show Server CLI command.
SHOW SERVER CLI
For more information, see Show Server CLI command in Chapter 5.