Sony DCR-TRV950 User Manual
Page 175
175
“Memory Stick” Operations
You can automatically play back images in sequence. This function is useful especially
when checking recorded images or during a presentation.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV950 only). Make
sure that the LOCK switch is set to the further side (unlock position).
(2) Press FN and select PAGE3.
(3) Press SLIDE SHOW.
(4) Press START. Your camcorder plays back the images recorded on the
“Memory Stick” in sequence.
To stop the slide show
Press
END.
To pause during a slide show
Press PAUSE.
To return to FN
Press
END to return to PAGE3, then press EXIT.
To start the slide show from a particular image
Select the desired image using –/+ buttons before step 4.
To view recorded images on TV
Before operation connect your camcorder to a TV with the A/V connecting cable
supplied with your camcorder.
If you change the “Memory Stick” during operation
The slide show does not operate. If you change the “Memory Stick,” be sure to follow
the steps again from the beginning.
2
FN
4
1 / 6
SLIDE SHOW
100–00001
+
–
START
END
1152
Playing back images in a continuous loop
– SLIDE SHOW