Sony DCR-TRV950 - Manual (Page 133)

133
“Memory Stick” Operations
Selecting the image size
You can select either of two image sizes
Still images:
1152 × 864 or 640 × 480. (When the POWER switch is set to CAMERA
or VCR, the image size is automatically set to 640 × 480.)
The default setting is 1152 × 864.
Moving pictures: 320 × 240 or 160 × 112
The default setting is 320 × 240.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV950 only). Make
sure that the LOCK switch is set to the further side (unlock position).
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select STILL SET (still
image) or MOVIE SET (moving picture) in , then press the dial (p. 211).
(3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the
dial.
The indicator changes as follows:
Still images:
Moving pictures:
Using a “Memory Stick” – Introduction
1152 640
320 160
3
4
1
320 1152
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
RETURN
1152 Ч 864
640 Ч 480
[MENU] : END
MEMORY SET
MOVIE SET
IMAGESIZE
REMAIN
RETURN
320 Ч 240
160 Ч 112
[MENU] : END
REMAIN
1min
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE
RETURN
640 × 480
[MENU] : END
REMAIN
40
REMAIN
12
MEMORY SET
MOVIE SET
IMAGESIZE
REMAIN
RETURN
160 × 112
[MENU] : END
REMAIN
5min
LOCK
POWER
OFF(CHG)
CAMERA
MEMORY/
NETWORK
VCR
MENU
STILL SET MOVIE SET
STILL SET MOVIE SET