Sony DCR-TRV950 - Manual (Page 150)

150
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX
To change the still image to be superimposed
Press –/+ on the right lower corner before step 6.
To cancel MEMORY MIX
Press OFF to return to PAGE1.
Notes
•You cannot use the MEMORY MIX for moving pictures recorded on a “Memory
Stick.”
•When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
•You cannot change the mode setting. Press OFF to return to PAGE1.
Image data modified on your computer or shot with other equipment
You may not be able to play back modified images with your camcorder.
When you record the still image without superimposing
Select M. LUMI. mode. Press <-/+ mark> until all bars are displayed. Only the still
image will be displayed on the screen.
When you select M. OVERLAP
You cannot change the still image or the mode setting.
To record the superimposed image as a still image
Press PHOTO deeper in step 8 (You should set PHOTO REC in to TAPE in the
menu settings beforehand).
MEM
M I X
4
5
6
FN
+ –
+ –
2
8
POWER
OFF(CHG)
CAMERA
MEMORY/
NETWORK
VCR
100–0001
+ –
MEM MIX
M C CAM
LUMI
OVER-
LAP
OFF OK
M C CAM
CHROM
CAM C M
CHROM
M. LUMI
100–0001
+ –
MEM MIX
OFF OK
+ –
M. LUMI
100–0001
+ –
MEM MIX
OFF OK
+ –
Still image