Sony ICD-MS1 - Manual (Page 21)

21
Editing Messages on the IC Recorder
Editing Messages on the IC
Recorder
Adding a Recording
Adding a Recording to a
Previously Recorded
Message
You can add a recording to the message being
played back.
The added recording will be placed after the
current message and counted as a part of the
message.
1
During playback, press zREC/
STOP button for more than 1
second.
The "ADD REC" indicator appears and
flashes three times on the display
window.
The OPR indicator will turn red.
The new recording will be added at the
end of the current message.
2
Press zREC/STOP button or STOP
button to stop the recording.
STOP
z REC/STOP
Adding an Overwrite
Recording during Playback
You can add an overwrite recording after the
selected point in a recorded message. The
part of the message after the selected point is
deleted.
1
During playback, press zREC/
STOP button briefly.
The "OVER WRITE?" indicator appears
and flashes on the display window.
The OPR indicator will flash red.
2
Press zREC/STOP button to start
recording
The OPR indicator will turn red.
3
Press zREC/STOP button or STOP
button to stop the recording.
Note
• The added message will be recorded in the same
recording mode (SP or LP; see page 36) as the
original message, regardless of the current
recording mode setting.
• You cannot overwrite if the remaining memory of
the “Memory Stick“ is not long enough. For more
information, see “Troubleshooting“ (page 61).
OPR indicator
During playback of Message 3
Added recording
After adding a recording
Message 4
Meeting at 2
on December 1. at Conference
room A
Message 3 Message 4
Message 3
ADD REC
0
H
02
M
43
S
S P
OVERWR TE? I
0
H
02
M
43
S
S P
The starting point of an overwrite recording
Message 2
Message 2
Message 3
Message 3
Added overwrite recording in message 2
The deleted part
of the message 2