Sony DSC-H20 - Manual (Page 49)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
49 GB
• When using the digital zoom or [AF Illuminator], the AF range finder frame is disabled and appears in a
dotted line. In this case, the camera works to focus on the subjects at the center of the screen.
• When the focus mode is set to other than [Multi AF], you cannot use the Face Detection function.
• Only [Multi AF] or
(unlimited distance) is available for movies.
• The focus mode is fixed to [Multi AF] while the Smile Shutter function is activated.
• The Semi-manual distance setting contains some errors, and this error increases when the zoom is set to
the T side or the lens is tilted upward or downward.
Notes
z Focusing on subjects near the edge of the screen
If the subject is out of focus, do as follows:
1 Recompose the shot so that the subject is centered
in the AF range finder, and press the shutter
button halfway to focus on the subject (AF lock).
2 When the AE/AF lock indicator stops flashing and
remains on, return to the fully composed shot, and
press the shutter button fully down.
• As long as you do not press the shutter button fully
down, you can retry the procedure as many times as
necessary.
AF range finder
frame
AE/AF lock
indicator