Sony HDR-SR1 - Manual (Page 109)

109
Trou
bl
esh
oot
in
g
Still picture folder is full. Cannot
record still pictures.
• Delete unnecessary images (p. 55) or
perform [ FORMAT] (p. 66).
HD movie recording disabled.
SD movie recording disabled.
• Movies cannot be recorded due to some
limitations of the hard disk of the
camcorder. However, you may be able
to record still images.
Still recording disabled.
• Still images cannot be recorded due to
some limitations of the hard disk of the
camcorder. However, you may be able
to record movies.
No more still pictures during movie
recording.
• You are trying to record more than 3
still images, the maximum number that
can be recorded at one time of
recording with the Dual Rec
function(p. 41).
No applicable files available.
• Image files have been deleted.
HDD format error.
• The hard disk of the camcorder is set
differently from the default format.
Performing [
FORMAT] (p. 66)
may enable you to use your camcorder.
This will delete all data in the hard disk.
Data error.
• An error occurred during reading or
writing the hard disk of the camcorder.
This may occur when you keep
applying shock on the camcorder.
Unable to access HDD.
• An error occurred during reading or
writing the hard disk of the camcorder.
This may occur when you keep
applying shock on the camcorder.
Management file damaged. Create
new file?
• The image management file is
damaged. When you touch [YES], a
new image management file is created.
The old recorded images on the hard
disk of the camcorder cannot be played
back. (Image files are not damaged.)
In this case, copy the image files to
computer using the supplied software.
See “First Step Guide” on the supplied
CD-ROM for details.
HD movie management information
is damaged. Create new
information?
• The HD movie management
information is damaged. When you
touch [YES], an HD movie
management information is created.
The old recorded images on the hard
disk of the camcorder cannot be played
back. (Image files are not damaged.)
In this case, copy the image files to
computer using the supplied software.
See “First Step Guide” on the supplied
CD-ROM for details.
Buffer overflow
• You cannot record because the drop
sensor senses a drop of the camcorder
repeatedly. If you may be at risk of
dropping the camcorder constantly, set
the drop sensor to [OFF], and you may
be able to record the image again
(p. 80).
Continued ,