Sony MZ-N1 - Manual (Page 92)

92
SORRY • You tried to erase the track mark at the beginning of the first track
or group.
• You tried to erase a track mark to combine tracks the recorder
cannot combine (a track recorded in stereo and in mono, for
example).
• You tried to overwrite a track marks.
• You tried to set Digital Sound Preset while the “AUDIO OUT”
parameter was set to “LINE OUT”.
, Use the jog dial to set the “AUDIO OUT” parameter to
“HeadPhone” (page 27).
• You tried to press X or T MARK during synchro-recording.
• You tried to turn group mode on while programming.
, Turn group mode on before programming.
TEMP OVER • Heat has built up in the recorder.
, Let the recorder cool down.
TOC Edit • The MD player is recording information (track start and end
position) from the memory to the disk.
, Wait until this process is completed. Do not expose the player
to physical shock, nor disrupt power supply.
TOC ERR • The recorder cannot read the disc information correctly.
, Insert another disc.
, If it is no problem to erase the entire disc, do so (page 64).
TR FULL • Track number 254 has been reached.
, Erase unnecessary tracks (page 64).
TrPROTECT • You tried to record or edit a track that is protected from erasing.
, Record or edit on other tracks.
• You tried to edit a track that has been checked out from a
computer.
, Check the track back in to the computer and then edit.
Error message Meaning/Remedy