Sony MZ-N1 - Manual (Page 49)

49
Connecting to a stereo
system (LINE OUT)
Connect the i/LINE OUT jack of the
recorder to the LINE IN jacks of an
amplifier or a tape player with a line
cable. For more information on line
cables, see “Optional accessories”
(page 93). The output is analog. The
recorder plays the MD digitally and sends
analog signals to the connected
equipment.
When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the “AUDIO OUT” parameter for the
i
/LINE OUT jack.
1
Press the jog dial.
2
Turn the dial until “AUDIO OUT”
flashes in the display, and then press
to enter.
3
Turn the jog dial until “LINE OUT”
flashes in the display, and then press
to enter.
Notes
• If the “AUDIO OUT” parameter for the i/
LINE OUT jack is set to “LINE OUT”,
VOLUME +/– or Digital Sound Preset will
not function.
• The “AUDIO OUT” parameter for the i/
LINE OUT jack cannot be set to “LINE OUT”
when the remote control is connected.
• When you connect the headphones/earphones
directly to the recorder, set the “AUDIO
OUT” parameter for the i/LINE OUT jack to
“HeadPhone” in step 3.
to LINE IN
2 phono plugs
L
(white)
Stereo mini-plug
R
(red)
RK-
G136
to i/LINE OUT
RK-
G129
Jog dial
Stereo system,
etc.