Sony MZ-N1 - Manual (Page 16)

16
2
Charging the rechargeable battery.
1 Connect the AC power adaptor to the
USB cradle and the AC adaptor to a wall
outlet. 2 Place the recorder on the USB cradle.
While pressing down on the recorder,
tilt it backward to fit it onto the USB
cradle.
3 Verify that the charge lamp lights up.
Full charging takes about three and a
half hours. When it is completed, the
charge lamp goes off. 4 Remove the recorder from the USB
cradle.
While pressing down on the recorder,
lean it forward to remove it.
For models supplied with the AC plug adaptor
If the AC power adaptor does not fit the wall outlet, use the AC plug adaptor.
AC power
adaptor
To DC IN 3V
To a wall
outlet
USB cradle
charge lamp