beautypg.com

Sony STR-DA2800ES User Manual

Page 13

background image

13

US

SB
Surround Back
Example:
Recording format: 5.1
Speaker pattern: 3/0.1
Sound Field: A.F.D. Auto

I LFE

Lights up when input signals being
played back contain an LFE (Low
Frequency Effects) channel.

J Dolby Pro Logic indicator

Lights up with one of the respective
indicators when the receiver performs
Dolby Pro Logic processing. This matrix
surround decoding technology can
enhance input signals.
;PL
Dolby Pro Logic
;PLII
Dolby Pro Logic II
;PLIIx
Dolby Pro Logic IIx
;PLIIz
Dolby Pro Logic IIz

K Speaker system indicator

(page 44)

L BI-AMP (page 87)
M D.L.L. (page 96)
N D.C.A.C. (page 92)

Lights up when the measurement results
of the “Auto Calibration” function are
applied.

O EQ

Lights up when the equalizer is activated.

P S.OPT.

Lights up when the sound optimizer
function is activated (page 62).

Q MEM

Lights up when the preset memory
function is activated.

R DTS-HD indicator

Lights up when the receiver is decoding
DTS-HD.
DTS-HD
Lights up constantly with the one of the
following indicators.
MSTR
DTS-HD Master Audio
HI RES
DTS-HD High Resolution Audio

S NEO:6

Lights up when DTS Neo:6 Cinema/
Music decoding is activated.

T D.RANGE

Lights up when dynamic range
compression is activated.

U A.P.M. (page 93)

Lights up when the A.P.M. (Automatic
Phase Matching) function is activated.

V Tuning indicator

Lights up when the receiver tunes to a
radio station.
ST
Stereo reception

W DTS(-ES) indicator

Lights up when DTS or DTS-ES signals
are input.
DTS
Lights up when the receiver is decoding
DTS signals.
DTS-ES
Lights up with one of the following
indicators, depending on the input signal
decoding format.
96/24
DTS 96/24 (96 kHz/24 bit) decoding

X LPCM

Lights up when Linear PCM (Pulse Code
Modulation) signals are input.