Sony PEG-NZ90 - Manual (Page 39)

39
Basic operations of your
Sony CLIÉ™
handheld
Notes
• Only the compact flash type data network card can be inserted into the wireless
communication slot. Network cards or memory cards other than the above-mentioned
will not work. Do not use any other card in your CLIÉ handheld, as it may cause a
malfunction.
• If your CLIÉ handheld is not working properly, remove the network card once, and
insert the network card again.
• There may be some data network services that may not be used, depending on the
network card and provider that you are using. For details, refer to the operating
instructions of your network card or contact your Internet service provider.
Inserting the network card
Tip
The protection card is inserted into the wireless communication slot at the factory.
Note
Do not insert the network card forcibly in the wrong direction or at the wrong angle. It
may cause a malfunction or damage your CLIÉ handheld.
Removing the network card
Make sure that your CLIÉ handheld is turned off prior to removing the network
card.
Notes
• Do not remove the network card while it is connected to the Internet. It may cause a
malfunction.
• When the wireless communication slot is empty, always insert the protection card to
protect the slot.
• Do not remove the network card forcibly in the wrong direction or at the wrong angle.
It may cause a malfunction, or damage your CLIÉ handheld or network card.