Sony PEG-NZ90 - Manual (Page 31)

31
Basic operations of your
Sony CLIÉ™
handheld
Functions of parts
POWER Switch
Tip
When you turn on your CLIÉ handheld for the first time, the Welcome screen is
displayed (page 23).
Note
If you cannot turn on your CLIÉ handheld, make sure that if the HOLD switch is not in
the HOLD position.
If you try to turn on your CLIÉ handheld while the HOLD switch is in the HOLD
position, the POWER LED indicator blinks green three times.
Turning off your CLIÉ handheld
Slide the POWER switch again.
Tip
You do not have to save data, quit an application, or perform any of the other shutdown
procedures that your computer requires.
Sliding the POWER switch for more than two
seconds
You can switch on/off the backlight of the LCD.
Turning on your CLIÉ handheld
Slide the POWER switch.
Your CLIÉ handheld turns on and the
last screen you viewed is displayed.
When your CLIÉ handheld turns on,
the POWER LED (page 32) indicator
lights green.
POWER Switch