Sony PEG-NZ90 - Manual (Page 19)

19
Charging your So
n
y
CLIÉ™
handheld
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • • • •
Charging your
Sony CLIÉ™
handheld
Step 1: Inserting/Replacing the battery
Before you use your CLIÉ handheld for the first time,
insert the supplied Battery Pack into your CLIÉ
handheld and be sure to charge the battery.
When you replace the battery, be sure to turn off your
CLIÉ handheld and check that the POWER LED and
“Memory Stick” LED are off prior to opening the
battery cover.
If you open the battery cover while the power is on,
data stored on your CLIÉ handheld or data being
recorded to a “Memory Stick” media may be deleted.
1
Open the battery cover.
2
Insert the battery.
You can easily insert the
battery by sliding the battery
release knob with the tip of the
battery.
Face the battery terminal
towards the display panel
side