Sony PCG-SRX99K - Manual (Page 34)

3. Click Add. The Edit Configuration dialog box appears.
4. Type a profile name, and select Peer-to-Peer Group from the Network Type drop-down list.
5. Click Next.
6. Type a name in the Network Name box, and select a channel using the Channel Number drop-down list.
7. Click Next.
8. Set up an encryption key, so only the individuals to whom you give the encryption key can gain access to the
network:
1. Click to select the Enable Data Security check box.
2. Select either Use Alphanumeric Characters or Use Hexadecimal.
3. Type a five-character encryption key in the Key box using either alphanumeric or hexadecimal
characters, depending on your selection in the previous step.
4. Click Next.
Add/Edit Configuration Profile Window
9. Select a power management option, and click Next.
10. Click to select the Renew IP Address when selecting this profile check box, so you don't have to type the IP
Address everytime you want to connect to the network.
11. Click Finish.
Page 34