Sony DSC-V3 - Manual (Page 87)

87
Advanced still image viewing
Protecting images
— Protect
This function protects images against
accidental erasure.
Control button Mode dial
MENU
• Note that formatting the recording medium
erases all the data in the recording medium
even if images are protected, and these images
cannot be recovered.
• It may take some time to protect the images.
In single-image mode
 Set the mode dial to .
 Display the image you want to
protect with
/.
 Press MENU.
The menu appears.
 Select  (Protect) with /,
then press
.
The displayed image is protected. The
 (protect) indicator appears on the
image.
60min VGA
101 2/9
Protect
Exit
BACK/NEXT
 To continue and protect other
images, select the desired
image with
/, then press .
To cancel the protection
Press
 again in step  or . The 
indicator disappears.
In index mode
 Set the mode dial to , then
press (index) to display
the index (nine-image) screen.
Press (index) twice to display a
sixteen-image index screen.
 Press MENU.
The menu appears.
 Select  (Protect) with /,
then press
.
 Select [Select] with /, then
press
.
 Select the image you want
to protect with
///, then
press
.
The green
 indicator appears on the
selected image.
TONEXT MENU • SELECT
 Repeat step  to protect
other images.
 Press MENU.