Sony ILCE-7S - Manual (Page 150)

Hint
You can release the locked dial/control wheel by holding the Fn (Function) button down.
[164] How to Use Using shooting functions Setting the other functions of this product
Deactivate Monitor
When you press the key to which the [Deactivate Monitor] function is assigned, [Live View
Display] is switched to [Setting Effect OFF], and the screen display is switched to [No Disp.
Info.].
1. MENU
→
(Custom Settings
) → [Custom Key Settings] → set the [Deactivate
Monitor] function to the desired key.
2. Press the key to which [Deactivate Monitor] was assigned.
Note
Even if you perform [Deactivate Monitor], the backlight of monitor remains on. To turn off
the backlight of monitor, press the FINDER/MONITOR button.
[165] How to Use Using shooting functions Setting the other functions of this product
Aperture Preview
With the monitor or viewfinder, you may see an image with an aperture that differs from the
shooting result. Since the blurring of a subject changes if the aperture is changed, the
blurriness of the actual picture will differ from the image you were viewing prior to shooting.
While you press and hold the key to which you assigned the [Aperture Preview] function, the
aperture is stepped down to the set aperture value and you can check the blurriness prior to
shooting.
1. MENU
→
(Custom Settings
) → [Custom Key Settings] → set the [Aperture Preview]
function to the desired key.
2. Confirm the image by pressing the key to which [Aperture Preview] was assigned.
Hint