Self-timer [97, Spd priority cont, Self-timer – Sony ILCE-7S User Manual
Page 100
Spd Priority Cont.
The product continues to shoot as long as the shutter button is pressed. You can
continuously shoot at a rate faster than that of [Cont. Shooting].
1. MENU
→
(Camera Settings)
→ [Drive Mode] → [Spd Priority Cont.].
Note
The speed of continuous shooting is estimated using our criteria. The speed of
continuous shooting may be slower, depending on shooting conditions (Image size, ISO
setting, High ISO NR, or the setting of [Distortion Comp.]).
Between continuous shooting frames, an image of each frame is immediately displayed.
Hint
In [Spd Priority Cont.] mode, the focus is fixed when you press the shutter button halfway
down for the first image, and the focus is fixed after that. However, the exposure value is
adjusted for each image. To use the same exposure for subsequent shots, change the
following settings.
Set [
AEL w/ shutter] to [Auto] or [Off].
[97] How to Use
Using shooting functions
Selecting a drive mode (Continuous
shooting/Self-timer)
Self-timer
The product shoots an image using the self-timer with a 10-second or 2-second delay.
1. MENU
→
(Camera Settings)
→ [Drive Mode] → [Self-timer].
2. Select the desired mode using the right/left side of the control wheel.
Menu item details
Self-timer: 10 Sec (default setting):
Sets the 10-second delay self-timer.
When you press the shutter button, the self-timer lamp flashes, a beep sounds, and the
shutter operates after 10 seconds. To cancel the self-timer, press the shutter button again.
Self-timer: 2 Sec:
Sets the 2-second delay self-timer. This reduces the camera-shake caused by pressing the