Sony ILCE-7S User Manual

Page 128

Sets the color phase. (-7 to +7)

Color Depth

Sets the color depth for each color phase. This function is more effective for chromatic colors

and less effective for achromatic colors. The color looks deeper as you increase the setting

value towards the positive side, and lighter as you decrease the value towards the negative

side. This function is effective even if you set [Color Mode] to [Black & White].

[R] -7 (light red) to +7 (deep red)

[G] -7 (light green) to +7 (deep green)

[B] -7 (light blue) to +7 (deep blue)

[C] -7 (light cyan) to +7 (deep cyan)

[M] -7 (light magenta) to +7 (deep magenta)

[Y] -7 (light yellow) to +7 (deep yellow)

Detail

Sets items for [Detail].

Level: Sets the [Detail] level. (-7 to +7)

Adjust: The following parameters can be selected manually.

Mode: Selects auto/manual setting. (Auto (automatic optimization) / Manual (The details

are set manually.))

V/H Balance: Sets the vertical (V) and horizontal (H) balance of DETAIL. (-2 (off to the

vertical (V) side) to +2 (off to the horizontal (H) side))

B/W Balance: Selects the balance of the lower DETAIL (B) and the upper DETAIL (W).

(Type1 (off to the lower DETAIL (B) side) to Type5 (off to the upper DETAIL (W) side))

Limit: Sets the limit level of [Detail]. (0 (Low limit level: likely to be limited) to 7 (High limit

level: unlikely to be limited))

Crispning: Sets the crispening level. (0 (shallow crispening level) to 7 (deep crispening

level))

Hi-Light Detail: Sets the [Detail] level in the high intensity areas. (0 to 4)

Copy

Copies the settings of the picture profile to another picture profile number.

→

(Camera Settings

) → [Picture Profile] → [Copy]

Reset

Resets the picture profile to the default setting. You cannot reset all picture profile settings at

once.

→

(Camera Settings

) → [Picture Profile] → [Reset]