Sony SVR-2000 - Manual (Page 21)

21 Connection Examples
filename[03 hookup fm] model name1[PTV Receiver]
Co
nnec
ting Y
o
u
r
Eq
uipm
ent
Use this example if you have an antenna or cable without a cable box, or you do not
have a VCR.
1 Find your program source cable.
The program source cable is the cable that your cable company installed, or the
one that’s connected to your antenna. This cable is probably already hooked up to
your VCR or TV; if so, disconnect it.
2 Connect your program source cable to the RF In jack on the
back of the SVR Recorder.
3 Connect the SVR Recorder to your TV.
If your TV has a composite video input, connect an Audio/Video cable (supplied)
from the SVR Recorder Output to your TV’s Input. If not, connect the RF coaxial
cable (supplied) from the RF Out jack on the back of the SVR Recorder to RF In
on the back of your TV.
4 Continue.
Now continue with step 4 on page 34.
01_COV.book Page 21 Sunday, May 26, 2002 11:46 AM