Sony SVR-2000 - Manual (Page 16)

16 Connection Examples
filename[03 hookup fm] model name1[PTV Receiver] [X XXX XXX XX (X1)]
Example 1: Antenna or cable, with a VCR, and splitting the signal Note
If you have cable with a set-top box and if
you want to split the signal, use the following
procedure.
1 Attach the RF splitter to the RF Coaxial
cable coming out of the wall, before it
connects to the cable box.
2 Connect one of the RF Coaxial cables
coming from the RF splitter to the RF In
jack on the back of your set-top box.
3 Connect the set-top box’s RF Out jack to
the SVR Recorder’s RF In jack using an
RF Coaxial cable. This will let the SVR
Recorder record your premium channels
normally.
4 Attach the other RF Coaxial cable coming
from the RF splitter to your TV or VCR’s
RF In. You won’t be able to watch
premium channels with this connection,
but other channels will work fine if your
TV or VCR is cable-ready (which most
are).
Outputs Inputs Cntrl Out Phone Line In AC RF
In
RF
Out
R L
Audio
Video Ch
3/4 S-Video S-Video
Serial
IR
Antenna
In
RF
Out
Ch
3/4
IN
OUT
R L
Audio
Video
A
B
Antenna In
R L
Audio Video S-Video
IN OUT
OUT
Optional
or
VCR
SVR
Recorder
Splitter
TV
01_COV.book Page 16 Sunday, May 26, 2002 11:46 AM