Sony SVR-2000 - Manual (Page 19)

19 Connection Examples
filename[03 hookup fm] model name1[PTV Receiver]
Co
nnec
ting Y
o
u
r
Eq
uipm
ent
Use this example if you have an antenna or cable without a cable box, and you have a
VCR, and you do not need to split your signal in order to watch one program while you
record another.
1 Find your program source cable.
The program source cable is the cable that your cable company installed, or the
one that’s connected to your antenna. This cable is probably already hooked up to
your VCR or TV; if so, disconnect it.
2 Connect your program source cable to the RF In jack on the
back of the SVR Recorder.
3 Continue.
Now continue with step 3 on page 32.
01_COV.book Page 19 Sunday, May 26, 2002 11:46 AM