Use this function if the buttons on the touch panel does not work correctly.
It is recommended that you connect your camcorder to the wall outlet (wall socket) using the supplied AC
Adaptor during the operation.

[Setup]

[

General Settings]

[Calibration].

2. Touch “

” displayed on the screen with the corner of memory card or the like 3 times.

Touch [Cancel] to cancel calibration.

Notes

If you did not press the right spot, try the calibration again.
Do not use a sharp-pointed object for calibration. Doing so may damage the LCD screen.
You cannot calibrate the LCD screen if it is rotated, or closed with the screen facing out.

210

This manual is related to the following products:

HDR-PJ430V