Sony KDF-37H1000 - Manual (Page 40)

40
5 Remove the lamp door.
Holding the door knob, press the door lever
toward the door knob in the direction the
arrow is pointing. Then, pull the lamp door
out of the TV towards you.
6 Pull the lamp out of the TV.
Grip the lamp by the indented grooves as
illustrated below.
Pull the lamp straight out of the TV as
illustrated below.
~
• The lamp is very hot immediately after use. Do not
touch the inside of the lamp compartment, the glass
portion of the lamp, or the surrounding parts.
• After the used lamp has cooled, place it into the empty
box of the replacement lamp. Never put the used lamp
into a plastic bag.
7 Slide the new lamp into its place.
Insert the new lamp into place by holding the
indented grooves firmly. Make sure the lamp is
securely mounted into the compartment.
Failure to do so may cause a fire or the screen
to go dark.
~
• If the lamp is not securely reattached, the self-
diagnostic function may be triggered and the POWER
LED blinks six times (see page 21).
8
Reattach the lamp door.
Be sure that the word “TOP” imprinted on the
lamp door is on top while placing the door
lamp into the compartment.
Grip the door knob, but do not hold in the
door lever when sliding the lamp door into the
compartment.
While keeping the lamp door at a slant, slide
the lamp door into the compartment by
leading with the left side. Insert the two tabs
into the slot and follow the guide rail. Once
the left side can no longer be pushed in, press
the lamp door lever toward the door knob.
Shut the lamp door by releasing the door
lever.
~
• The lamp door is securely closed when a clicking
sound occurs. Make sure it is securely closed by
tugging on the door knob.