Sony KDF-37H1000 - Manual (Page 32)

32
Display Area Normal Displays the picture in its original size.
-1/-2 Enlarges the picture to hide the edge of the picture.
Screen Position Adjust the Vertical positioning by pressing the V/v buttons. Press the B/b buttons to
adjust the Horizontal positioning.
~
• Vertical adjustment is available only when Wide Mode is set to Zoom or Wide
Zoom.
• Screen Position feature is useful if the TV is connected to game equipment.
Vertical Size Adjusts the vertical size of the picture. (Available only in Wide Zoom and Zoom.)
Press
B/b and press to adjust.
H Center Allows you to move the position of the picture horizontally (left and right) while PC
Wide Mode is set to Zoom.
To Adjust the H Center
Press
V/v to highlight H Center and press .
Press B/b to correct the centering then press .
V Center Allows you to move the position of the picture vertically (up and down) while PC Wide
Mode is set to Zoom.
To Adjust the V Center
Press
V/v to highlight V Center and press .
Press B/b to correct the centering then press .
Wide Mode Normal Select to display the picture in its original size of PC format resolution
of 1152 × 648 or less.
Full 1 Select to enlarge the picture to fill the display area, keeping its original
aspect ratio.
Full 2 Select to enlarge the picture to fill the display area.
~
• PC Wide Mode can also be accessed by pressing the WIDE button
while in PC mode.
Zoom Select to enlarge the picture horizontally and vertically to an equal
aspect ratio that fills the wide screen.
Screen settings for PC Input Modes differ from all other input modes and are shown below.
Video Options Settings
CineMotion Select Auto to automatically detect film content and apply a reverse 3-2 pulldown
process. Moving pictures will appear cleaner and more natural looking. The CineMotion
feature can be set separately for each external input. Select Off to disable the detection.
Game Mode Select On to optimize the enjoyment of fast paced video game capturing every movement.
Game Mode can be set to each external input. Select Off to disable the mode.