Sony KDF-37H1000 - Manual (Page 28)

28
TV Settings Descriptions
Product Support
Contact Sony Sony contact information is available from this screen for your convenience. Your TV’s
specific information such as Model Name, Serial Number, Software Version and
downloadable ratings if available from the TV are displayed here.
Signal Diagnostics Press to display the diagnostics information for the current signal.
Clock/Timers Settings
Current Time
Sets the current time (day, hour, minutes, and AM/PM). The Timer feature will not be
available until you set the Current Time.
1
Use the V/v/B/b button to highlight the Clock/Timers icon and press .
2
Use the V/v/B/b button to set the current time.
3
Press RETURN to display the confirmation screen.
4
Select Yes or No to save changes you made. Selecting Yes will save your settings
and exit the Current Time setting screen.
Timer After the Current Time is set, you can set the Timer to automatically turn the TV on
and off and tune to a specific channel at a scheduled time.
1
Use the V/v/B/b button to highlight the Timer icon and press .
2
Press to select On to set the timer.
3
Use the V/v/B/b button to set the following: Day of the Week, Time, Duration,
Channel, and Volume.
4
Press RETURN to display the confirmation screen.
5
Select Yes or No to save changes you made. Selecting Yes will save your settings
and will light up the TIMER LED.
6
Exit the Timer setting screen.
Sleep Timer Sets the time in minutes (Off, 15min, 30min, 45min, 60min, 90min, or 120min) that
you want the TV to remain on before shutting off automatically. This can also be set using
the SLEEP button on the remote control (see page 22).
Picture Settings
Picture Mode Vivid For enhanced picture contrast and sharpness.
Standard For standard picture settings. Recommended for home entertainment.
Cinema For viewing film-based content. Most suitable for viewing in a
theater-like environment.
~
• Picture Mode can also be accessed by pressing PICTURE on the remote control to directly toggle the modes.
Reset Resets the current Picture Mode setting to the default values.