beautypg.com

Screen settings – Sony KDF-37H1000 User Manual

Page 31

background image

31

Usin

g TV

F

e

atu

res

Surround

S-FORCE Front
Surround

Provides a virtual surround sound experience made possible using just
two front speakers.

Off

Select for normal stereo or mono reception.

Sound Booster

The Sound Booster provides a fuller sound with a greater sense of depth and width, by
emphasizing the High and Low frequency sounds. Select High or Low for the amount of
boost you desire while in the Custom Sound Mode. Selecting Off will bypass the
emphasis.

~

• The Sound Booster is automatically in the High position for Dynamic Sound

Mode and Low position for Standard Sound Mode.

Steady Sound

On

Stabilizes the volume across all programs and commercials.

Off

Turns off Steady Sound.

Volume Offset

Adjusts the volume level of the current input (TV or video input) relative to other inputs.

Screen Settings

Wide Mode

Wide Zoom

Fills the screen with minimum distortion.

Normal

Displays the 4:3 picture in its original size when the original source is 4:3.

~

Normal is not available when you are watching 720p, 1080i or 1080p sources.

Full

Enlarges the picture horizontally to fill the screen when the original
source is 4:3 (Standard-definition source). When the original source is
16:9 (High-definition source), select this mode to display the 16:9
picture in its original size.

Zoom

Enlarges the original picture while maintaining the aspect ratio.

~

Wide Mode can also be accessed by pressing the WIDE button.

Auto Wide

On

Automatically changes Wide Mode setting based upon content.
If frequent screen changes are disturbing to you, select Off.

Off

Turns off the Auto Wide option. Choose a Wide Mode from the
Wide Mode option.

4:3 Default
Select the default screen
mode to use for 4:3
sources

Wide Zoom

Enlarges the 4:3 picture to fill the 16:9 screen, keeping the original
image as much as possible.

Normal

Displays the 4:3 picture in its original size.

Full

Select to enlarge the 4:3 picture horizontally only, to fill the display area.

Zoom

Select to enlarge the picture horizontally and vertically while
maintaining the aspect ratio that fills the wide screen.

Off

Select to continue using the current screen mode setting when the
channel or input is changed.

~

• This option is not available for HDMI PC input.
• This option is not available if Auto Wide is set to Off.
• If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the

current channel. When you change channels (or inputs), Wide Mode is automatically
replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode
setting as channels and inputs are changed, set 4:3 Default to Off.

(Continued)