Sony VPL-HS10 - Manual (Page 16)

Step 3: Adjusting the Picture Size and Position
Con
n
ect
ions a
n
d
P
repar
ati
o
n
s
GB
16
Step 3: Adjusting
the Picture Size
and Position
Tip
The ? / 1 (on/standby), INPUT, MENU, and m/M/
ENTER (joystick) buttons on the side panel of the projector
function the same as those on the remote control.
1
Plug the AC power cord into a
wall outlet.
The ON/STANDBY indicator lights in red and
the projector goes into standby mode.
2
Press the [ / 1 (on/standby)
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of the
connected equipment.
4
Press INPUT to project the
picture on the screen.
Each time you press the button, the input
indication changes. (
1 page 21)
5
Adjust the focus roughly using
the FOCUS +/– button.
+
–
+
–
INPUT LIGHT
STANDARD CINEMA DYNAMIC
USER 2
PICTURE MODE
USER 3 USER 1
MS SLIDE MENU APA
LENS
VOLUME SIDE SHOT
RESET WIDE MODE
ENTER
6
5,7
Adjuster adjustment
button
Front remote control
detector
2
4
Rear remote control
detector
6
ON/
STANDBY
Lights in red.
ON/
STANDBY Lights in green.
INPUT
NTSC 3.58
V i d e o 1
FOCUS +/– button