Sony DCR-TRV70 - Manual (Page 59)

59
Preparation for Network Operation
SMTP: Enter the SMTP (Simple Mail Transfer Protocol) server address of your
provider. The SMTP server is for sending email.
Tip
This “SMTP server” is sometimes referred to as the “mail server”, “SMTP
mail server”, etc. The SMTP server may be the same as the POP server,
depending on the provider.
APOP: Select whether you want to use APOP (p. 146).
(6) Tap [Browser].
The Browser screen appears.
Note
The Mail preference screen and the Browser screen are shared by Dial-up
Setup and LAN Setup. You cannot set these two preferences at the same time.
(7) Set the following items:
Proxy: Enter the proxy server address of your provider.
Port: Enter the port number of the proxy server of your provider.
Tip
These entries may be unnecessary, depending on your provider. For details,
consult your provider.
(8) Tap [Exit].
Setup is complete, and the Network Setup screen appears again.
(9) Tap [Exit].
The Setup screen appears again.
For a more detailed setup, go to “Setting other preferences” (p. 65).
Setting the network preferences