Sony DHC-MD515 - Manual (Page 31)

31
6
Press ENTER/YES.
The track is programmed. The total
number of programmed steps appears,
followed by the total playing time of the
program.
7
Repeat steps 4 through 6 to program
other tracks.
8
Press (P.
All the tracks play in the order you
selected.
To cancel Program Play
Press p to stop play, then CONTINUE.
To cancel programming tracks
Press p at any point from step 4 to 6.
To erase the entire program
Press p once in program stop mode.
To add a track to the end of the
program
1 In stop mode, turn MULTI JOG until the
desired track number appears.
2 Press ENTER/YES.
The selected track is added to the end of
the program.
Total playing time Last programmed track
1 2 3
LEVEL SYNC -
PROGRAM
MD1-3 9 0 . 7
Tips
• To program the entire MD as one step of the
program, press ENTER/YES while “AL” appears
after selecting the desired MD in step 4.
• The program you made remains after Program
Play finishes. To play the same program again,
press (P.
• If you eject an MD from the MD 1 – 3 slot, the
tracks of the ejected MD are erased from the
program.
• “--.--” appears instead of the total playing time
when the total program time exceeds 100 minutes.