Sony DHC-MD515 - Manual (Page 10)

10
Connecting
optional A/V
components and
outdoor antennas
Note on the “VIDEO” and “GAME”
indications
Change the indications according to the component
connected to VIDEO/GAME IN.
•
When you connect a VCR, AM/FM tuner or tape
deck,
select “VIDEO.”
• When you connect a video game, multi disc
player or DAT deck, select “GAME.”
• If the sound is distorted when “VIDEO” is
selected , change to “GAME.”
Connecting audio
components
Connecting a tape deck
Connect the plugs to jacks of the same color.
To listen to the tape deck sound
Press TAPE.
Tips
• When you connect the TC-TX515 stereo cassette
deck to the DHC-MD515, be sure to use the AU
BUS terminals. For details, refer to the instruction
supplied with the TC-TX515.
• The A and B markings under the TAPE IN/OUT
jacks guide you to connect the optional TC-TX515
deck.
Note
You cannot connect a turntable which does not have
a built-in equalizer.
To enhance your system, you can connect
optional components. Refer to the
instructions of each component.
Connecting a video game
or VCR
Connect the plugs to jacks of the same color.
To listen to the VCR sound
Press FUNCTION repeatedly until “VIDEO”
appears.
To listen to the video game sound
Press FUNCTION repeatedly until “GAME”
appears.
If “GAME” does not appear when pressing
FUNCTION, change the “VIDEO” indication
to “GAME” following the procedure below.
1
Press FUNCTION repeatedly until
“VIDEO” appears.
2 Press EDIT/NO.
“GAME ?” appears.
3 Press ENTER/YES.
Press EDIT/NO again to change the
indication back to “VIDEO.”
To the audio output
of a tape deck To the audio input of
a tape deck
To the AU BUS connector of the
TC-TX515 stereo cassette deck
To the audio output of a video
game or VCR