Sony DHC-MD515 - Manual (Page 17)

Basic Operations
17
2
Press PRESET.
3
Turn MULTI JOG to tune in the
desired preset station.
* Station name appears only when you
have labeled the station (see page 55).
To listen to non-preset radio
stations
• Press MANUAL in step 2, then turn
MULTI JOG to tune in the desired station
(Manual Tuning).
• Press AUTO in step 2, then turn MULTI
JOG. The frequency indication changes
and scanning stops when the system tunes
in a station (Automatic Tuning).
To cancel Automatic Tuning
Press p.
Tips
• You can switch from another source to the tuner
just by pressing TUNER (Automatic Source
Selection
).
• To improve broadcast reception, reorient the
supplied antennas.
• When an FM program is noisy, press STEREO/
MONO until “MONO” appears. There will be no
stereo effect, but the reception will improve. Press
the button again to restore the stereo effect.
Listening to the
radio
First, preset radio stations in the tuner’s
memory (see page 6). To turn on the system,
press POWER.
1
Press TUNER repeatedly until the
band you want appears.
Each time you press the button, the band
changes as follows:
North American model:
FM n AM
European model:
FM n MW n LW
Other models:
FM n MW n SW
To
Turn off the
radio
Adjust the
volume
Do this
Press POWER.
Turn VOLUME.
Turn
counterclockwise
for lower preset
numbers. Turn clockwise
for higher preset
numbers.
Station name* or
frequency
Preset number
n
1
2
3 VOLUME
STEREO/
MONO
AUTO MANUAL
MANUAL
FM OO. MHz 5 1
TUNED STEREO
PRESET
FM 1O M 5 1 O. Hz
POWER
PRESET
FM OO. MHz 5 1
p
TAPE
n
n