Sony PCV-L600 User Manual
Page 925
8. Connect all peripheral devices and AC power, and then turn on the computer.
Adding Memory
The computer has two memory slots. For memory upgrades, use only 3.3V unbuffered 4-clock
64-bit, 100 MHz SDRAM DIMM module Rev1.0.
To install memory
Make sure you observe the proper safety precautions when you add DIMMs to your Sony computer. See
in the VAIO Consumer Information Guide.
1. Shut down your computer and turn off all peripheral devices, such as your printer.
2. Unplug your computer and any peripheral devices.
3. Remove the cover as described in
.
4. If necessary, remove any cables, add-in cards, or other components to access the DIMM
sockets.
5. Handle the DIMM only by the edges, and remove it from its anti-static package.
6. Locate the keys on the bottom edge of the DIMM .
7. Align the DIMM over the socket.
To avoid damaging the DIMM socket, move the DIMM socket tabs slightly outward to relieve pressure. The
DIMM should then click easily into place.
8. Firmly insert the bottom edge of the DIMM into the socket.
9. Press evenly against the DIMM's upper corners. The end latches snap into position automatically.
Page 925