Troubleshooting, Battery pack and power – Sony DSC-TX1 User Manual
Page 55
55
GB
Ot
h
e
rs
Troubleshooting
If you experience trouble with the camera, try the following solutions.
On repairing cameras with internal memory or Music files function included, data in the
camera may be checked on minimum necessity to verify and improve the malfunction
symptoms. Sony will not copy or save any of those data.
Cannot insert the battery pack.
•
Make sure the direction of the battery is correct, and insert it until the battery eject lever is
locked (page 14).
Cannot turn on the camera.
•
After inserting the battery pack into the camera, it may take a few moments for the camera to
power up.
•
Insert the battery pack correctly (page 14).
•
The battery pack is discharged. Insert a charged battery pack (page 12).
•
Use a recommended battery pack.
The power turns off suddenly.
•
Depending on the camera and battery temperature, the power may turn off automatically to
protect the camera. In this case, a message is displayed on the LCD screen before the power
turns off.
•
If you do not operate the camera for about two minutes while the power is on, the camera
turns off automatically to prevent wearing down the battery pack. Turn on the camera again.
1
Check the items below, and refer to “Cyber-shot Handbook” (PDF).
If a code such as “C/E:ss:ss” appears on the screen, refer to “Cyber-shot
Handbook.”
2
Remove the battery pack, wait for about one minute, re-insert the battery
pack, then turn on the power.
3
Initialize the settings (page 50).
4
Consult your Sony dealer or local authorized Sony service facility.
Battery pack and power