Sony VPL-VW1000ES - Manual (Page 78)

78
USB charging AC power adaptor (AC-UD10) (1)
Specifications
Input voltage: AC 100 to 240 V,
0.2 A, 50/60 Hz
Rated output voltage: DC 5 V,
1.5 A
Please use the above power
requirements.
AC power cord for USB charging AC power
adaptor (1)
For the customers in the
U.S.A. and Canada
WARNING:
Using this unit at a voltage other
than 120 V may require the use
of a different line cord or
attachment plug, or both. To
reduce the risk of fire or electric
shock, refer servicing to
qualified service personnel.
USB charging cable (G2551-0077-00/-01 or
APY5244-010020/SONY)
(1.2 m) (1)
Câble de charge USB (G2551-0077-00/-01 ou
APY5244-010020/SONY)
(1,2 m) (1)
CD-ROM (ImageDirector3) (1)
Operating Instructions (1)
Optional accessories
Projector Lamp
LMP-H330 (for replacement)
Projector Suspension Support
PSS-H10
3D glasses
TDG-PJ1
3D Sync Transmitter
TMR-PJ1, TMR-PJ2
• Not all optional accessories are available in
all countries and area. Please check with your
local Sony Authorized Dealer.
• Information on accessories in this manual is
current as of December 2011.
Design and specifications of this unit and its
optional accessories are subject to change without
notice.
The values for mass and dimensions are
approximate.
Warning on power connection
Use a proper power cord for your local power supply.
* Use a rated plug that complies with the regulation of each country/region and the specifications.
Note
Notes
Note
The United States,
Canada Continental
Europe UK, Ireland,
Australia,
New Zealand Japan China
Plug type YP-3 YP-12A * YP-359 VM0722
Female end YC-13 YC-13D VM0303B YC-13 VM0724
Cord type SVT H05VV-F CEE (13)
53 rd (OC) VCTF 227 IEC
53(RVV)
Rated Voltage
& Current 10A/125V 10A/250V 10A/250V 12A/125V 10A/250V
Safety approval UL/CSA VDE VDE DENANHO CCC