Sony VPL-VW1000ES - Manual (Page 38)

38
Using the Supplied Software to Adjust the
Picture Quality (ImageDirector3)
By using the “ImageDirector3” (supplied as a CD-ROM), you can make the desired
gamma correction from a computer connected to the unit. Connect the REMOTE or LAN
connector of the unit to a computer, then launch “ImageDirector3” on the computer.
For details on how to use the “ImageDirector3,” refer to the Help within the CD-ROM.
• You need to install the “ImageDirector3” on a computer beforehand.
• When connecting the REMOTE or LAN connector to a computer, connect with both the computer
and unit turned off.
• You can perform adjustment with “ImageDirector3” when “Gamma Correction” in the Picture
menu ( 1 page 45) is set to 1.8, 2.0, 2.1, 2.2, 2.4, or 2.6. Adjustment is not possible when it
is set to Gamma 7 to 10 and Off.
• Before using “ImageDirector3,” use the Picture menu to set “Gamma Correction” to 1.8, 2.0,
2.1, 2.2, 2.4, or 2.6. In “ImageDirector3”, the display is Gamma 1, Gamma 2, Gamma 3, Gamma
4, Gamma 5 and Gamma 6 respectively.
• If you use “ImageDirector3” while a 3D video image is displayed or a 3D signal is input, the image
may be distorted.
Notes