Sony VPL-VW1000ES - Manual (Page 77)

77
Ot
h
e
rs
Specifications
System
Display system
SXRD panel, projection system
Display device
Size of effective display area
0.74-inch (18.8 mm) SXRD
Number of pixels
26,542,080 pixels (8,847,360
pixels × 3)
Projection lens
2.1 times zoom lens (motorized)
f=21.3 mm to 46.2 mm
F2.9 to F3.9
Light source
Ultra High Pressure Lamp 330 W type
Screen size
60 inches to 300 inches (1,524 mm to
7,620 mm) (measured diagonally)
Accepted digital and analog video signals:
480/60i, 576/50i, 480/60p, 576/50p,
720/60p, 720/50p, 1080/60i, 1080/50i
The following items are available for
digital signal (HDMI input) only:
1080/60p, 1080/50p, 1080/24p,
3840 × 2160/24p, 3840 × 2160/25p,
3840 × 2160/30p, 4096 × 2160/24p
Accepted computer signals:
fH: 19 kHz to 72 kHz
fV: 48 Hz to 92 Hz
Maximum resolution 1,920 × 1,080
(HDMI input only)
For details, see “Preset Signals” ( 1
page 79).
Input/Output
HDMI (2 inputs)
Digital RGB/Y P B /C B P R /C R
Y P B /C B P R /C R
Component: phono type
Y with Sync: 1 Vp-p±2 dB sync
negative (75 ohms terminated)
P
B
/C
B
: 0.7 Vp-p±2 dB (75 ohms
terminated)
P
R
/C
R
: 0.7 Vp-p±2 dB (75 ohms
terminated)
INPUT A
Mini D-sub 15-pin
Analog RGB:
R: 0.7 Vp-p±2 dB
(75 ohms terminated)
G: 0.7 Vp-p±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p±2 dB sync
negative (75 ohms terminated)
B: 0.7 Vp-p±2 dB
(75 ohms terminated)
SYNC/HD: Composite sync input:
TTL level, positive/ negative
Horizontal sync input: TTL level,
positive/negative
VD: Vertical sync input: TTL
level, positive/negative
TRIGGER (2 connectors)
Minijack
DC 12 V Max. 100 mA
REMOTE
RS-232C: D-sub 9-pin (female)
LAN
RJ45, 10BASE-T/100BASE-TX
IR IN
Minijack
3D SYNC
RJ45 connector
General
Outside dimensions (w/h/d)
520 mm × 200 mm × 640 mm
(20
1
/
2
Ч 7
7
/
8
Ч 25
1
/
4
inches)
(without protrusions)
Mass Approx. 20 kg (44 lb 1.5 oz)
Power requirements
AC 100 V to 240 V, 4.8 A to 2.0 A,
50/60 Hz
Power consumption
480 W
Standby power requirements
3.9 W (when “Standby Mode” is set to
“Standard”)
0.4 W (when “Standby Mode” is set to
“Low”)
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote control RM-PJ22 (1)
Size AA (R6) manganese batteries (2)
AC power cord for projector (1)
Plug holder (1)
AC inlet cover (1)
3D glasses (2)
Pouch for the 3D glasses (2)