Sony FWD-32LX2F - Manual (Page 69)

29 GB
GB
Setup Settings
To highlight an option and to change settings, press
F
/
f
/
G
/
g
.
Press to confirm the selection.
The “Setup” settings include the following options:
Language Select to display all on-screen settings in your language of choice: “English”,
“Español”, “Français”, “Italiano”, “Deutsch” or “
”.
Timer Setting You can adjust time, display the built-in clock, or set the timer to make the display
power on/off at a predetermined time.
“Clock Set”: Sets the time and the day.
“Clock Display”: Displays the currently set time on the screen when set to “On”.
“On/Off Timer”: Sets the time at which the power is automatically turned on or off.
If the built-in clock tends to lose time, the internal battery may be exhausted. Please contact
your authorized Sony dealer to have the battery replaced.
ECO Mode “Off”: Select to view picture without the benefit of power saving.
“Low”/“High”: Select to view picture with reduced power consumption. It also
enhances the black level.
“Picture Off”: Select to turn off the picture. Audio stays on with your selected
volume setting.
Auto Shut Off “On”: The display automatically enters the standby mode when a signal is not input
to the video or S Video input connectors for more than about 5 minutes. The display
automatically enters the power saving mode when a signal is not input to the HDMI
or RGB/component input connectors for more than about 30 seconds.
“Off”: The display is not turned off automatically even when no signal is input to any
connector.
Tip
While in the standby mode, press the 1 POWER switch on the display or the POWER ON
switch on the remote control to turn the display on. In the power saving mode, the display is
turned on automatically when a signal is input.
Language : English
Timer Setting
Auto Shut Off:
ECO Mode: Off
Off
Advanced Setup
Information
All Reset
IP Address Setup
Speed Setup
Setup
English
Español
Français
Italiano
Deutsch
: Exit: Back: : MENU
HDMI 1
Sel Set
Note