Sony DSC-W100 - Manual (Page 93)

93
Tr
oub
lesh
oo
ti
n
g
Your camera does not work.
• Use the type of battery pack you can use with this camera.
• The battery level is low (The E indicator appears). Charge the battery pack ( t step 1 in
“Read This First”).
The power is on, but the camera does not work.
• The built-in microcomputer is not working properly. Remove the battery pack, and then, after
one minute, insert the battery pack and turn on the camera.
Cannot identify an indicator on the screen.
• See page 20.
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it (page 101).
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The lens does not move when you turn off the camera.
• The battery pack is discharged. Replace it with a charged battery pack ( t Step 1 in “Read
This First”) or use the AC Adaptor (not supplied).
The Clock Set screen appears when you turn on the camera.
• Set the date and time again ( t step 2 in “Read This First”).
Others