Addendum, Networka ir acpa4000 – American Power Conversion AIRACPA4000 User Manual

Page 38

ADDENDUM

NetworkA

IR ACPA4000

7. The last screen verifies that the certificate has been created and

instructs you on the next task, to load the server certificate to the
Network Management Card. It displays the location and name of the
server certificate, which has a

.p15

file extension and contains the

Network Management Card’s private key and the public key obtained
from the

.cer

.crt

file.

Load the server certificate to the Network Management Card.

Perform these steps:

1. On the

Network

menu of the Web interface of the Network

Management Card, select the

Web/SSL

option.

2. In the

SSL/TLS Server Certificate

section of the page, browse to the

server certificate, the

.p15

file you created in the procedure

Import the

signed certificate

. (The default location is

C:\Program Files\American

Power Conversion\APC Security Wizard

Alternatively, you can use FTP or Secure CoPy (SCP) to
transfer the server certificate to the Network Management
Card. If you use FTP or SCP for the transfer, you must
specify the correct location,

\sec

, on the Network

Management Card. For SCP, the command to transfer a
certificate named

cert.p15

to a Network Management Card

with an IP address of 156.205.6.185 would be:

scp cert.p15 [email protected]:\sec\cert.p15