Addendum, Networka ir acpa4000 – American Power Conversion AIRACPA4000 User Manual

Page 25

ADDENDUM

NetworkA

IR ACPA4000

To update the configuration settings for one or more NetworkAIR PA
Portable Air Conditioners using the Wizard:

1. Install (if necessary) and run the Wizard (included on the NetworkAIR

PA Portable Air Conditioner).

2. If you have a saved

.ini

file, load it and change any settings as needed.

You can also create and save new settings.

3. Click

Finish

4. Select the settings you want to transmit to the Management Card, and

then click

Next >

5. You can view, print, and save your new settings. When finished, click

Next >

6. Choose the

Network (via FTP)

option, and then click

Next >

7. If you have saved a list of Management Card IP addresses, load that

list now. If you do not have a saved list, enter the IP addresses of the
Management Cards that you want to receive the configuration settings.
Enter the

FTP Server Port

and Administrator user name and

password of the Management Cards to which you are transmitting the
settings.

8. Save the new IP address list, and then click

Next >

9. Click

Apply

to transmit the configuration settings to all of the specified

Management Cards. You can save, print, or clear the window
containing the download results.

See

Installing the Wizard

To verify the update, see

Verifying Upgrades and Updates