Addendum, Networka ir acpa4000 – American Power Conversion AIRACPA4000 User Manual

Page 18

ADDENDUM

NetworkA

IR ACPA4000

b. For Windows FTP clients, separate the port number from the IP

address by a space. For example, if the Network Management Card’s

FTP Server Port

setting has been changed from its default of

, such

as to

21000

, you would use the following command for a Windows

FTP client transferring a file to a Network Management Card with an
IP address of 150.250.6.10.

ftp>

open 150.250.6.10 21000

4. Log on using the Administrator user name and password. (

apc

is the

default for both.)

5. Upgrade the AOS. For example:

ftp>

bin

ftp>

put apc_hw02_aos_225.bin

6. When FTP confirms the transfer, type

quit

to close the session.

7. Wait 20 seconds, and then repeat

step 2

through

for the

application module. In

, use the application module file instead of

the AOS module.