Using record on demand key, Using save key – Avaya 1220 User Manual
Page 154

Operating your Avaya 1220 IP Deskphone
154
Using Record On Demand key
If this feature is enabled, you can use the Record on Demand (ROD) key
to record your telephone conversation.
Press the ROD key to start or stop the call recording. This key is
associated with the active user ID and is displayed only if a call is active.
The ROD key blinks while it is connecting to the call recording application,
and is lit when the call is recording.
The ROD key is displayed in the following scenarios:
•
Normal operation — Press the ROD key during an active call to
record the call.
•
Call Recording (CR) application in ROD Mode — Press the ROD key
during an active call to record the call
•
Bulk Recording — For an active call or unregistered DN/Position ID,
call recording is initiated even though the ROD key is not pressed.
Using SAVE key
Use the
SAVE
key to save the recording of an active call. This key is
associated with the active user ID and is operational only if a call is active.
The
SAVE
key is displayed in the following scenarios:
•
Normal operations — If the
SAVE
key is pressed during an active
call, the call is saved.
•
CR application in Bulk Record + Save everything mode — Recorded
conversation is saved at the end of the call. If the
SAVE
key is
pressed, then the call is not saved.
1.
Press the
ROD
key during an active call.
2.
To stop the call recording, press the
ROD
key
again.