Sony LF-PK1 User Manual
Page 51
Oth
e
rs
51
TV
Picture freezes frequently.
Depending on your network, check the causes and remedies described in
“Watching TV at Home” (
1 page 52) or “Watching TV Away from
Block noise appears.
This is due to video compression processing. It is not a malfunction.
When you change the rate, video is not
smooth.
It is because of video compression, not a breakdown.
Compared with usual, the video or
sound quality gets worse.
Disconnect NetAV and reconnect it again.
Picture is distorted.
Check the latest driver of video card (graphic card) on the manufacturer’s
support pages. (
Disconnected when switching to another
rate.
When you click [Rate] and switch between [Auto] and [Manual], change
the rate from [1] (lowest rate) or [6] (highest rate) to another rate, or
change from another rate to [1] or [6] while connected, the NetAV
connection is disconnected and then reconnected.
In addition, when connected to an LF-X1/LF-X5 base station, the
following occurs:
• “Auto” cannot be selected.
• The NetAV connection is disconnected and then reconnected only when
switching the rate from [1] to another rate or from another rate to [1].
Problem
Causes and remedies
Cannot get any TV channels to appear
(screen appears to be filled with snow).
• Make sure the antenna cable is securely connected to the base station
• Try selecting different channels in the [Channel Settings] window
Cannot get specific TV channels to
appear.
Try selecting different channels in the [Channel Settings] window
(
Cable TV channels do not display
properly.
The base station supports cable TV channels 1 to 125. If you want to
watch other channels or the channel signal is scrambled, connect a cable
set-top box to a video input terminal on the base station.
Double images or ghosts.
• Make sure the antenna cable or CATV cable is securely connected to
the base station (
• Adjust the position, orientation, and angle of the antenna.
Snow or dim pictures.
• Make sure the antenna is not damaged or broken.
• Make sure the base station is connected properly to the antenna with the
antenna cable or CATV cable.
• Make sure the selected channel is currently broadcasting.
Stripes and noise.
• Make sure the antenna cable or CATV cable is securely connected to
the base station (
• Keep the antenna cable or CATV cable away from the power cord and
other connection cables.
Problem
Causes and remedies