Sony LF-PK1 - Manual (Page 16)

Setu
p an
d Co
nn
ecti
o
n
s
16
4
Enter the WEP key printed on the sticker of
the base station and then click [Connect].
Proceed to STEP1-3 ( 1 page 16).
Before you register your computer with the base
station and display TV on the computer, you need
to install LocationFree Player on the computer
(
1 page 32).
1
With the base station powered on, press the
[SETUP MODE] button on the rear panel of
the base station. Keep pressing until the
SETUP MODE LED starts blinking.
The SETUP MODE LED blinks.
z Tip
When using a router to connect to the base
station, it takes a while for the IP address to be
assigned to the base station by DHCP. The base
station does not appear in the window shown in
Step 2 until the IP address has been assigned.
Proceed to Step 2 after the NETWORK LED
turns on.
STEP 1-3
Display TV on your
LocationFree device
SETUP MODE
LED