Sony LF-PK1 - Manual (Page 29)

Setting
Up LocationFr
ee Pla
y
e
r
29
Setting Up LocationFree Player
This section explains how to configure TV
channels and the remote control.
1
Click anywhere inside the window.
The index appears.
2
Click [Settings] at the bottom right of the
window.
The [Settings] window appears.
z Tip
[Settings] at the bottom right of the window
appears only when you are connected with
NetAV. When you are not connected, click
[Connect] at the bottom left of the window,
select the base station you want to set up
from the list that appears, click [Properties],
and then click [Channel/Remote Settings].
3
Select [Channel Settings] under [TV/Video
Settings].
4
Configure all the settings.
1 If you subscribe to cable TV, select the
[ON] option.
When [CABLE] is set to [ON], channels
1 to 125 are automatically selected, and
when [CABLE] is set to [OFF], channels
2 to 69 are automatically selected.
2 Clear the check boxes for channels that
you do not watch.
5
Click [OK] or [Apply].
Click [OK] to enable the settings and close
the [Settings] window.
Click [Apply] to enable the settings without
closing the [Settings] window.
Making TV and
Video Settings
Configuring the TV Channels
[Settings]
1
2