Sony LF-PK1 - Manual (Page 27)

W
a
tc
hin
g
TV an
d Vid
e
o
s
on
L
o
cat
ion
Free
Pla
y
er
27
The secondary audio program (SAP) mode is
available for broadcasts that include multiple
audio tracks.
When a TV program with multiple audio tracks is
tuned in, click [SAP] repeatedly at the bottom of
the window to switch among audio tracks.
Each time the [SAP] button is clicked,
[STEREO] or [SAP] appears on the window.
z Tip
To select an SAP option for external equipment, use
the remote supplied with the connected equipment.
However, some devices can be operated with the on-
screen remote control.
You can adjust the streaming rate according to the
bandwidth available on your communications
connection. This allows you to watch video with
the optimum quality.
Normally, selecting [Auto] sets the optimal video
rate in accordance with available bandwidth.
When selecting a rate manually, note that a higher
rate results in higher picture quality, but a higher
(larger number) rate requires a larger bandwidth
and video will tend to keep stopping and starting
if there is insufficient bandwidth for the higher
rate.
1
Click [Rate] at the bottom of the window.
The [Change Rate] window appears.
2
Click a rate, and then click [OK].
Note
When you switch between [Auto] and [Manual],
change the rate from [1] or [6] to another rate, or
change from another rate to [1] or [6] while
connected, the NetAV connection may be
disconnected and then reconnected automatically
in some cases.
Selecting a Secondary Audio
Program (SAP)
Adjusting the Video
Rate
Manual rate