Identifying parts and controls (base station), Identifying parts and controls, Base station) – Sony LF-PK1 User Manual

Page 5: Front, Rear

Identifying Parts and Controls (Base Station)

Identifying Parts and Controls

(Base Station)

1 WIRELESS LED

Indicates the wireless function status.
Blue: Connected with the LocationFree device on the 5 GHz

channel.

Green: Connected with the LocationFree device on the 2.4 GHz

channel.

Turns blue or green momentarily, then turns off for 3 seconds:

Wireless is enabled, but wireless communication with a
LocationFree device is not taking place.

2 NETWORK LED

Indicates the connection status to an external network, such as the
Internet.
Green slow blinking: Attempting to connect.
Green: Connected to the network. The LED blinks quickly when

data is transmitted.

Off: Not connected.

3 NETAV LED

Indicates the connection status with the LocationFree device.
Green fast blinking: NetAV authentication has failed.
Green slow blinking: Attempting to connect with NetAV.
Green: Connected with NetAV.
Umber blinking: Updating dynamic DNS.
Umber: Dynamic DNS failure.
Off: Not connected.
Red: The base station is being initialized.

4 SETUP MODE LED (

1 page 12)

Umber: The base station is in Setup mode.
Umber blinking: Easy registration is possible.

5 POWER LED (

1 page 13)

Green: The power is on.
Red blinking: A malfunction has occurred.

6 POWER button (

1 page 13)

Turns the base station power on and off.

7 LAN port

Connect a LAN cable.

8 BASE STATION RESET button (